ABS II Fault codes

[pera]

Is there anyone that know the ABS II fault codes? I've found the fault codes for the ABS 1 but I'm not 100% sure they are the same on the ABS II system. The problem is that according to the readings my ABS control unit have had it, but that's according to the ABS I codes and before I pay up for a replacement I want to be 100% sure that the ABS 1 and ABS II codes are the same. Much appriciated for all teh help I can get.

( reseting the system does not work so something has to be broken! )

Thanks!

[rkd]

Greetings - as noted in another post, you can get the ABSII fault code within the PDF document in the IBMWR site (http://www.ibmwr.org/r-tech/oilheads/R11Manual/Oilhead_Maintenance_2-25-02.pdf)

The text reads as follows:
ABS II:

- voltmeter on pin 2
- turn ignition on
- meter will indicate about 11V steady with no faults stored
- count eventual dips towards zero volts
- fix the cause of the fault and cancel code
ABS II Codes:

1 front pressure modulator
2 rear pressure modulator
3 front sensor
4 rear sensor
5 battery voltage low
6 ABS relay
7 ABS control unit
8 sensor gap front or rear